SS Bushed Steel Chain is best for operating underneath very gritty or abrasive condi-tions. This chain is usually called ?¡ãSteel Bushed?¡À or ?¡ãRollerless.?¡À Every element is machined and heat handled with the end result of strength and put on, assuring optimum match for your pins and bushings. Sidebars are generated to accommodate the ends from the pins which lock into position inside the sidebars and will not rotate for the duration of operation.
The supplies employed are very carefully chosen. The pins are alloy steel that incorporate nickel, chrome and molybdenum, which improves the chain life via its higher fatigue resistance, improved abrasive resistance, and enhanced tensile strength at both large and lower temperatures. These elements result in a premium product or service for conveyor and elevator support for gritty, abrasive, and fine particle materi-als this kind of as ashes, crushed coal, soda ash, cement, crushed stone, and gravel.
? Pitch Variety: 2.609 – 7.000?¡À
? Average Ultimate Strength: 25,000 – 200,000 lbs
? Max. Rec. Working Loads: 2,750 – 27,500 lbs
Assorted attachments are provided. Each of the cottered chain uses T-head cotters. Cottered construc-tion will be supplied unless riveted is requested. SS Bushed Steel Chain is produced in ac-cordance with manufacturer?¡¥s standards and could possibly be interchanged with standard bushed steel chain of other makers. Sprockets can be found in cast steel and fabricated when necessary.
Sealed joint chain is available for much less maintenance and greater put on resistance.